The creator did not write a description for this model.
Chosen by shared tags first, then category. Each one links to its own marketplace.
This uses an OpenBuilds C-beam and can be used both motorized or not. I have this up on OpenBuilds website as well which has a nice BOM as part of the project : I'm using a Nema17 motor with a 5:1 planetary Gearbox.
File types: STLLicence: Personal use only
ThingiverseFreeSystem Introduction video Operating modes: • A-B straight run • A-B with acceleration controls (ramp/Ease) • A-B-A Bounce mode • Time-lapse mode with built in intervalometer and camera shutter control • Six key sequencer allowing you to...
File types: STLLicence: Personal use only
ThingiverseFreeNEW CAMERA´S CARRIAGE : Thanks Daniel for the feedback + collaboration Watch it in action: This is a remotely controlled and Open Source CAMERA SLIDER with a tracking system .
File types: STLLicence: Personal use only
ThingiverseFreeNEW CAMERA´S CARRIAGE : Thanks Daniel for the feedback + collaboration Watch it in action: This is a remotely controlled and Open Source CAMERA SLIDER with a tracking system .
File types: STLLicence: Attribution
ThingiverseFreeWhen taking the Syrp Genie Mini out to find that its inadvertently powered on and drained....not a good start to a photo / timelapse session!
File types: STLLicence: Attribution
PrintablesFreeThis camera slider is used for DSLR or system cameras but also for action cams. You can use it with or without a motor driver.
File types: STLLicence: Personal use only
ThingiverseFreeThis is a continuation of the pan tilt mount project I designed for my DSLR Canon EOS 250D. (If you haven’t seen that: Here I have designed and added a slider to the pan tilt mount which allows for more complex camera movements.
File types: STLLicence: Attribution
ThingiverseFreeNot while this head is still available you should also check out the new DB3 WIFI & VISCA head here: This is the Digital Bird three axis balanced pan tilt head part of the Digital bird motion control system.
File types: STLLicence: Personal use only
ThingiverseFreeA camera dolly and rail system that can support a dSLR or other video gear. The system uses 608 series "skateboard" ball bearings and standard hardware found at any home improvement store.
File types: STLLicence: Attribution
ThingiverseFreeThe Digital Bird DIY 3D printable Mini Jib offers smooth near silent operation combined with range of exciting new camera moves not easily achieved with a slider.
File types: STLLicence: Personal use only
ThingiverseFreeThis will be a one axis camera rotation system. Two of these can be combined for Pan & Tilt operations. The parts listed below are for one rotator.
File types: SCAD STLLicence: Personal use only
ThingiverseFreeThis GoPro mount is copied from the Scubapro model. It's a universal support for snorkeling or apnea masks, easily mountable with an electrician plastic band.
File types: F3D STEP STLLicence: Personal use only
ThingiverseFreeThis was specifically designed to fit my iPhone which is in a case and my tripod quick release head (which is a Manfroto 3265 pistol grip head).
File types: STLLicence: Attribution
ThingiverseFreeThis is my 360° Gopro time lapse device, part bought part printed. I first bought an egg timer from the shop Tiger for £2 I then pulled the top off and measured up the interface to the clockwork bottom and designed my own top to include...
File types: STLLicence: Attribution
ThingiverseFreeAn universal and portable, single-print, DIY camera jib system for all your tabletop or cinematic video needs.
File types: STEP STLLicence: Attribution
PrintablesFreeA tabletop camera roller for getting smooth, panning shots at low angles. Adjustable steering angle from -45 to + 45 deg
File types: 3MF STEP STLLicence: Attribution
PrintablesFreeLegion Integrated Cinematography Rig System The inspiration for this build came from exploring the capabilities of the Lenovo AI Tab Legion Y700 - particularly its camera system, which immediately stood out as a powerful yet underutilized...
Licence: Marketplace terms
Creality CloudFreeThe CämGrip is a single-handed, slingshot-style camera mounting rig designed to eliminate wrist fatigue and free up your off-hand.
File types: STEP STLLicence: Attribution
PrintablesFreePLEASE PRINT USING THE 3MF FILE. - Thanks When printing please delete the inerts which you do not want, and duplicate the ones you do until they will fill up the housing.
File types: 3MF STEP STLLicence: Personal use only
PrintablesFreeBlackMagic Micro Converter Cradle HDMI to SDI mounting options and velcro saftey straps Snug fits for converter and ports, fits large HDMI snugly, SDI ports rest against cradle to keep port from becoming...
File types: 3MF BGCODE STEP STLLicence: Personal use only
PrintablesFreeFully 3D printed half cage for Sony camera - ZV1F with a extra coldshoe mount, ergonomic grip with rubberized surface.
File types: 3MF STLLicence: Marketplace terms
PrintablesPaidCustom gobo filters for the NEEWER FL10 spotlight, plus a blank template so you can design your own patterns.
File types: STLLicence: Public domain
PrintablesFreeFor the one other person in the world who MIGHT need this, here you go. This is a Rubin 1 Aperture Control Ring There are two versions, one that is .1mm tighter, with the spike ring and one that is .1mm loser, with the gear...
File types: STLLicence: Personal use only
MakerWorldFreeHello! Since I haven't found a compact tripod here on Thingiverse, I've decided to design one. It's very compact but also rigid, it can support a DSLR camera with ease.
File types: STLLicence: Attribution
ThingiverseFreeThis is my 3-axis, motion control, camera slider I designed for my DSLR Canon EOS 250D (EOS Rebel SL3). The Project video is on my YouTube channel: Here is a quick overview of the components and how the project works.
File types: STLLicence: Personal use only
ThingiverseFreeThis mount allows you to quickly and securely attach your camera to the shoulder strap of your backpack. Using this mount you can access your camera at any time during activities such as hiking and never miss a moment.
File types: DWG STLLicence: Attribution
ThingiverseFreeThis is an adaptor to convert a GoPro mount (either side) to a standard 1/4-20 tripod mount.
File types: SCAD STLLicence: Attribution
ThingiverseFreeCamera mount for all your iphone camera mounting needs! Universal iPhone camera mount for attaching your iPhone to anything you want to film! Designed for filming timelapse videos of 3d prints or anything you want!
File types: STLLicence: Personal use only
ThingiverseFreeHello! For all you guys who enjoyed my foldable camera tripod, I designed a holder for phones! It works WITHOUT screws or support material, all you need are the two parts and a rubber band.
File types: STLLicence: Personal use only
ThingiverseFreeI have standardised on 501 quick release plates for all my video and photography equipment. Only problem, I have more camera's than plates, so here is a compact, light-weight printable quick release plate that is compatible with 500 and...
File types: STLLicence: Attribution
ThingiverseFree3d Printed Time-lapse Dolly English Tutorial: Spanish tutorial:
File types: STLLicence: Attribution
ThingiverseFreePANOBOT: A Panorama robot, version 1 Panobot is a full automatic robot, which can be used to create Panoramas and Gigapixels with small and large cameras (like DSLRs). The camera is mounted on a turret to allow pan/tilt motion.
File types: STLLicence: Personal use only
ThingiverseFreeThe aim of this project is to provide an open source, top of the line camera slider for e.g. timelapses, that costs approx. $100. This project is somewhat advanced and requires several non 3d printed parts.
File types: STLLicence: Personal use only
ThingiverseFreeAdd cinematic movement to your video projects with a DIY slider. In this project, we'll show you how to use a [supported slide rail][2], [railing platform][3] and 3d printed parts to make a portable slider.
File types: STLLicence: Attribution
ThingiverseFreeThis mount is an easy-to-print and useful tool for anyone who frequently uses their iPhone as a camera. This mount simply allows the camera to be stood up on a flat surface.
File types: STLLicence: Personal use only
ThingiverseFreeMaterial： 1. Professional_DSLR_Slider_V4.0 2. 3D print parts； 3. Arduino mega2560; 4. Customed made circuit board; 5. 0.96’ 12864-OLED ;(CCD1306) 6. DRV8825 Stepper driver ; 7. GT2 timing belt ;(length:1.5m Width:6mm) 8.
File types: STLLicence: Personal use only
ThingiverseFreeExtension with standard GoPro connection with center distance between holes of 45 mm. Lightened and connected at critical points. The deformable point is near the pair of fins (not certified).
File types: STLLicence: Personal use only
ThingiverseFreeChest Mount Harness to use with you GoPro camera. I use a Hero 3 so i´m not sure how it will fit newer cameras like Hero 4.
File types: STLLicence: Attribution
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
