Printables
Temp Tower | Temperature Test | Stringing and Bridging Probe
- Creator (as listed at the source)
- Extrutim
- Licence
- Creative Commons — Attribution — Noncommercial — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF STL
- Pricing
- Free
- Published
- Category
- Test Models
- Likes
- 279
- Downloads
- 4,603
Overview
Since I could not find the ideal temp tower that meets my expectations, I designed my own.
Features:
- Uses little material because it is not too big
- Different overhangs, 45° and a curved one
Read the full description
- A thin wall at the overhang to test the layer adhesion by breaking it
- A bridge, from 30mm length in the back to 35mm in the front
- Several filigree datails
- No temperature labeling, as this varies according to the material anyway
- A large base for good bed adhesion
The individual segments are 10mm high, therefore every 10mm the temperature change can be set with the M104 S… command.
I have added a prepared 3mf file which contains all sizes of the Temptower and the temperature change at the right places. There you just have to select your printer profile and filament profile, slice and then right click on the places with the set gcode to enter your desired temperature.
Note: Since the question came up recently, the license states that you may not use this model commercially. For me it's ok if you show the photos or the model to your audience, even if you make money with it as long as you name me as the creator and link to this page. You are not allowed to sell the files or the printed model itself.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Temp Tower PLA Prusa Mini+This temp tower will start at 230 degrees Celsius and will end at 190 degrees. It's better to print with a higher temperature at beginning and go lower.
Helix Test Cube / Filament Sample / XYZ Calibration
Universal Heat Tower - rc1.0This is a Universal Heat Tower (UHT), create your own tower, combining the various temperature sections. Many blocks available, from 180 to 300. Put the blocks on top of each other, configure the slicer and print it!
Printer Calibration Temp TowerDies ist ein Temperaturturm mit dem man sein Filament auf die richtige Temperatur und Geschwindigkeit testen kann.
Smaller temp test (hot to cold)
Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2SDownload, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature.
Filament Temp TesterVery Fast, only 9g - not wasting filament, ready to be slice by your own, for all slicers, all printers, all filaments.
Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)See description over here: This is a remix for Prusa Core One / Core One + / Core One L.
Temperature Tower auto g-code insertion to set temps automatically - Tune PETG for no stringingRather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically.
stringing testSimple 2-Tower Stringing Test Welcome to the ultimate quick-and-easy stringing test! This simple two-tower model is designed to help you dial in your 3D printer's settings and banish those annoying plastic cobwebs for...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.