Printables

Koper / Capodistria, Slovenia - 3D Miniature

3D printable topographic miniature of Koper / Capodistria - 🇸🇮 Slovenia Capture the beauty of Koper / Capodistria 's city landscape with this topographic miniature!

What the marketplace statesPrintables

Creator (as listed at the source): hgross
Licence: Personal use onlyThe marketplace states no licence. SliSearch shows the most restrictive assumption; check the source page before you use the model.
File types: 3MF STL
Pricing: Paid
Published: May 16, 2026
Category: Home Decor

Overview

3D printable topographic miniature of Koper / Capodistria - 🇸🇮 Slovenia

Capture the beauty of Koper / Capodistria 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 45.544, 13.726 (LatLng) .

It is scaled down from a geographic area of around 2.819 km x 1.969 km to a 3D printable miniature in the dimensions of 170.5 mm x 119.5 mm . The scale from the geographic area (5.549 sq km) to the miniature is approximately ~16532:1 .

The terrain is modeled from geographic data for realistic terrain representation. Ideal for educational purposes, architectural visualization, or as a decorative piece.

Read the full description

Also don't miss out on the other miniatures. Find them in my miniature collection .

Explore all available miniature locations on the interactive miniature map .

Included Frames:

Dimensions of 190.70 x 139.70 x 16.88 mm, no text engraving with hanging holes

Dimensions of 178.70 x 127.70 x 16.88 mm, no text engraving with hanging holes (fits A1 mini bed size)

Dimensions of 190.70 x 139.70 x 17.38 mm, text Engraving "Koper" with hanging holes

Dimensions of 190.70 x 139.70 x 17.38 mm, text Engraving "Koper / Capodistria" with hanging holes

What's Included:

STL files for the miniature and all frame variants

Generic 3MF containing all STLs for easy import into any slicer

Bambu Studio 3MF with optimized print profiles for A, P, X, and H-Series printers (pre-colorized)

Snapmaker Orca 3MF with optimized print profiles for the Snapmaker U1 (pre-colorized)

Recommended Print Settings:

The included 3MF files contain two highly specialized print profiles: "miniature-classic" and "miniature-arachne". For optimal results, use "miniature-arachne" (note: expect long slicing times).

Due to the nature of geographic terrain data, models may contain non-manifold geometry or areas that require support material. This cannot be avoided. Our included print profiles handle these cases well.

For printers from other manufacturers or other slicers, check our Miniature Printing Guide for recommended settings (especially support settings).

Assembly:

Gently put the miniature into the frame. Depending on your printer's calibration, that should be enough to hold the miniature.

If in doubt, use some super glue. For PLA, I use this glue* (thick variant). I experienced best results with glue that contains Ethyl-2-cyanacrylat.

Hanging Holes: My frames always have a hole pattern divisible by 10 mm - for this miniature's size the "Hanging Hole Distance" results in 60 mm between holes.

Contains information from OpenStreetMap, which is made available here under the Open Database License (ODbL) .

*affiliate link: This post contains affiliate links. I earn from qualifying purchases at no extra cost to you.