Printables
Nocturne camera mount 2020 extrusion
- Creator (as listed at the source)
- ntpham
- Licence
- Creative Commons — Public DomainStated at the source marketplace; SliSearch does not verify licences.
- File types
- STEP
- Pricing
- Free
- Published
- Category
- Voron Parts & Upgrades
- Likes
- 1
- Downloads
- 2
Overview
2020 extrusion mount for Nocturne camera. Part is designed to mount to the underside of your top extrusions in the corner. Use M2/M2.5 screws to attach camera and front cover. Screws are threaded directly into plastic, no heatset inserts required. Print without support.
Part is tested on a 250 Trident with Stealthburner. There is good clearance when toolhead is at front left corner (picture 2).
BOM:
+ 2x M3 roll-in nuts.
+ 2x SHCS M3x8 screws.
+ 4x M2/M2.5 screws of at least 15 mm length per original design by Luke's Laboratory.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Voron 0 / Voron 0.1 Raspberry Pi Camera MountRaspberry pi camera mount for the voron 0 / voron 0.1 Get up close and personal with the nozzle & the print bed (>80% visible) Easy mounting with 1 M3x16 screw, 1 M3 nut and 1 M2x6 screws NO PRELOADING OF NUTS thank...
Trident R2 motor spacer / standoffs for leadscrew coupler V2For Trident R1 see this Model is for 33mm stepper body motors + 3.5mm , if yours are bigger simply cut some plastic off the top in slicer. The hole is to fix couplers.
Nocturne Camera - Voron 2.4 - Corner MountSame mounting method and mounting hardware are used (1x M5 Nut, 1x M5 x 20mm Socket Head Screw). The base / mount to the printer frame has been extended from approximately 85mm wide to 140mm wide.
Jabberwocky Cutter Cover for Trident R2 Front IdlersThis is a cover that slides over the front idlers of the Trident R2 so that the Jabberwocky toolhead's filament cutting arm has something to press against.
Blink Camera Printer Mount V2I had a Blink battery powered camera from Amazon that I wasn't using, so I thought it'd be cool to use it to watch my Voron 2.4 printer since I can check it from anywhere.
Voron Trident R2 Inverted Electronics Z Motor CoversThis model allows access the inverted Electronics bay in a Trident R2 without using any tools, and with a clean look.
Wide Angle Pi Cam Voron MountJust a quick remix to allow one to mount a larger PCB pi cam (32x32) using a Voron panel compatible 2020 mount. Camera used:
LED Strip Holder for Voron 2.4LED Strip Holder designed for VORON 2.4 LED Strip Holder (200mm).stl It's 210mm long and It's for a 20cm long LED strip. LED Strip Holder (250mm).stl It's 260mm long and It's for a 25cm long LED strip.
Creality Nebula Camera Holder for Ender-3 V3 KE(/SE)Intro This holder is intended for the Nebula camera and is attached to the end of the Z-bridge of the Ender-3 V3 KE. Of course, it can also be used on the SE that has been upgraded with the Creality Nebula Smart Kit.
Cable clip for 2020 profile VoronBuilding my first Voron 2.4......I was missing something to keep some of the cable in order, so I made this clip in 2 version, small and big It simply click into the 2020 extrusion and hold the cable in place There is a small bulge to keep...SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.