MakerWorld
고리 입니다.
Chosen by shared tags first, then category. Each one links to its own marketplace.
These are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis...
File types: STLLicence: Personal use only
ThingiverseFreeAs I did not find a cable chain suiting my needs, I decided to make my own. I was looking for a fully parametric cable chain, capable of output in CSG. The Cable Chains I found here were mostly only .stl Surfaces.
File types: SCAD STLLicence: Attribution
ThingiverseFreeA handle to move the bed more easely and avoid heat injuries ;) you have to print it HORIZONTALY (like the grey picture) you have to unscrew the knobs, place the handle and screw the knobs on it...
File types: STLLicence: Personal use only
ThingiverseFreeThis should fix a common problem people have with the Ender3 where the PTFE tube pops off. it clips around the pressure fitting to hold it tight. There are 3 different sizes for each side.
File types: GCODE STLLicence: Personal use only
ThingiverseFreeJust a simple geared knob for my CR-10 extruder. Fits most printers with Nema17 stepper motors or generally with 5mm shafts. An easy way to manipulate the feed and a nice visual tool to spot your retraction behavior.
File types: STLLicence: Attribution
ThingiverseFreeDrawer System for Ender 3 Pro Does NOT fit for Ender 3 the case is a combination of the designs from Littlefiver and DWS_design . for the drawers i made a new designs,, you can choose from empty (blank) or diveded versions.
File types: STLLicence: Personal use only
ThingiverseFreeCentered Fan Nozzle *Update 10.12.2016: Thanks for all your downloads and prints, I am very surprised that so many people liked my design :) On several requests i added a V2 version with a lesser angle on the back for better printing.
File types: STL STPLicence: Personal use only
ThingiverseFreeCreality Ender 3 users please read last update below #ZKNOB This two piece part replaces and adds to the acrylic stock cover on the Creality CR-10's Z-axis lead screw; It lets you manually control the hot end up and down (when steppers are...
File types: STLLicence: Personal use only
ThingiverseFreeCheck out HCV 3D Printer -- Anycubic i3 Mega X-Carriage MK4 - e3d v5 & v6 Version + Marlin 2.0 Firmware - e3d v5 (stock), e3d v6 & e3d v6 volcano hotends are supported - Fully new X-Carriage with better & more flexible bearing holding...
File types: STLLicence: Personal use only
ThingiverseFreeI redid this because the original one didn't fit my printer for a mm in the z axis (the arms should be 7.25 with a gap of 12mm and they were off).
File types: STLLicence: Attribution
ThingiverseFreeThis is a z-axis stabilizer, designed to work with the bearings found in the fidget spinners you no longer use... 22mm x 8mm x 7mm I basically needed this to provide support for the Z-Axis Manual Adjustment Knob I added.
File types: STLLicence: Attribution
ThingiverseFreeI was searching for a "big" bed leveling knob which is looking pretty and eventually has some indicator for turn direction - "up". The one from "TechDayEveryDay" has perfect dimensions.
File types: STLLicence: Attribution
ThingiverseFreeThis an assortment of cable clips designed to work with the Creality Ender 3/Ender 3 Pro. Currently, the collection includes clips for the display cable, power wires, and extruder wire loom.
File types: STLLicence: Attribution
ThingiverseFreeA filament guide with a roller for even smoother filament feed than fixed ring. Designed for the Ender 3, easily plugs in to the back of the aluminum profile. T-shaped arm is both lightweight and strong with little material used.
File types: BLEND STLLicence: Attribution
ThingiverseFreeA fan mount that is very quick and easy to print and directs the air more effectively towards the nozzle.
File types: F3Z STLLicence: Attribution
ThingiverseFreeAll printable parts for your Original Prusa MINI+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the...
File types: STLLicence: Share the source
PrintablesFreeJust a large comfortable knob to place over the filament release bolt on the extruder.
ThingiverseFreeAn Extruder knob for the Ender 3 and much more 3D Printers tested on 0.2 and 0.3, but i recommend printing it 0.2 No Support needed
ThingiverseFreeSay goodbye to warping and the noisy fans... This mod work well with the hotend stock fan mounted on the I3 (also Mega-S,Mega-X). (E3DV5) Only the extrusion cooling fan MUST be replaced by another model.
File types: STLLicence: Personal use only
ThingiverseFreeFile types: GCODE STLLicence: Attribution
ThingiverseFreePrintable all in one convenient and fast STL! This model features a jointed snake that can be printed in one piece without the need for assembly.
File types: STLLicence: Personal use only
ThingiverseFreeThese wheels have a locking mechanism built in so they remain where you set them indefinitely. I also prefer feeling that I should go up/down one or two clicks during the process of leveling, it helps me level much faster than I could with...
File types: STEP STLLicence: Personal use only
ThingiverseFreeiDryer Unit: DIY System for Drying and Storing Filament --- Project Description: The iDryer Unit is an open-source system designed for drying and storing filament, created specifically for 3D printing enthusiasts.
File types: STLLicence: Personal use only
ThingiverseFreeSummary Spool Winder Spool winder for filament and other spools with a maximum dimension of 210mm in diameter and 76mm wide. If the spool axle is inset then wider spools may be accommodated.
Licence: Personal use only
Creality CloudFreeThis project is a complete overhaul of the original Wanhao i3 with a few main objectives: - Keep the core components of the printer while upgrading its structure. - Create maximum rigidity through a sturdy 3030 Aluminium extrusion frame.
File types: STLLicence: Personal use only
ThingiverseFreeThis is a stabalizer for the Anet A8 Z-Axis. You need two 608 bearing, one for the left Z motor and one for the right Z motor.
File types: STLLicence: Attribution
ThingiverseFreeNEW BOWDEN VERSION (PICS BELOW) Changelog 4/09/19 Added Pictures 4/01/19 Added Electronics Case 3/19/2019 Organized file section / added print guide 3/17/2019 Added Bowden .3mf file (courtesy of PteroDancer) 01/28/2019 Added wiring diagram...
File types: 3MF STLLicence: Attribution
ThingiverseFreeIt's a Hat for your printer! Should work on most printers. It just clips around the wires and Bowden tube. I added Googly eyes to my printer to have more fun. I hope these are fun and that you enjoy them.
File types: STLLicence: Personal use only
ThingiverseFreeA simple v-slot tool tray for the Creality Ender-3 3D printer. Print and slide into the bottom v-slot on the y axis, the fit could be a little better but it does the trick to hold your things lying around :) Please share your makes if you...
File types: GCODE STLLicence: Attribution
ThingiverseFreeAll printable parts for your Original Prusa XL . The parts are divided into folders based on subassemblies. Print instructions ATTENTION: Two materials (PETG and Polycarbonate) are recommended for the printable parts.
File types: STL STPLicence: Share the source
PrintablesFreeI printed a huge amount of this popular Modified Container. The beads fell out within my AMS almost breaking the unit and making multiple prints fail before i found the problem.
File types: 3MF STLLicence: Personal use only
ThingiverseFreeProbably every 3D printing enthusiast prints calibration parts quite frequently. However, all of them usually end up in recycle bin, because such parts are technical and ugly.
File types: STLLicence: No changes allowed
ThingiverseFreeIt's a live! My monster, called like Frankenstein ((= All what you need is only E3Dv6 standard extruder with his fan. Second fan and bearings you already have in original Anet A6 extruder. Required bowden filament feeder.
File types: STLLicence: Personal use only
ThingiverseFreeCompletely printable frame for Hypercube. As loing as you have 177mm height. Based off tech2c recomended measurements. *designed to print with my lasercut i3 with e3d x179 y190 z180 - Print with a 5 line or more brim.
File types: STLLicence: Attribution
ThingiverseFreeA spool holder for Creality 3d printers that will solve 3 common problems. 1- Will hold spools that are wide 2- Will hold spools that have a narrow inner diameter 3- Will minimize friction Print the 6 parts and assemble with 2x 608ZZ...
File types: IGES STEP STLLicence: Personal use only
ThingiverseFreeCreality 3D Ender 3 45° Spool Holder. Provides better filament angle. Uses stock frame head screw M5X45 for mounting. Print it with a good Infill Density for best strength and durability.
File types: STLLicence: Attribution
ThingiverseFreeParametric V Slot covers for Ender 3 v2 crossbar and CREALITY logo topper. I do plan on adding more versions of the parts. Two different size drips.
File types: 3MF STL SVGLicence: Attribution
ThingiverseFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.
![Anycubic i3 Mega X-Carriage [MK4], a preview image from Thingiverse](/previews/thingiverse/3537449-0/card-f344165638f1e93c.webp)
![[FIXED] Silica Gel Container - Inside Spool, a preview image from Thingiverse](/previews/thingiverse/7260356-0/card-50864b3eee0734a0.webp)
