Thingiverse
Dunlin Easy Wing
- Creator (as listed at the source)
- mirbedirhanber
- Licence
- Creative Commons - Attribution - Non-CommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- OBJ
- Pricing
- Free
- Published
- Category
- R/C Vehicles
Overview
OURANOS EASY WING PACK — Dunlin-557 Philosophy (GASB-style): fewest possible pieces, control surfaces printed in place and cut free, screw/pin assembly — no glue needed. Units mm · watertight · all pieces PRE-ORIENTED for the bed PIECES (16): · pfus1 Fuselage section 1 / 7 — 0–97 mm · hollow · keyed snap lip aft + 2×M2 · pre-oriented · height 109 mm · pfus2 Fuselage section 2 / 7 — 97–213 mm · hollow · keyed snap lip aft + 2×M2 · socket fwd · pre-oriented · height 129 mm · pfus3 Fuselage section 3 / 7 — 213–285 mm · hollow · keyed snap lip aft + 2×M2 · socket fwd · pre-oriented · height 85 mm · pfus4 Fuselage section 4 / 7 — 285–440 mm · wing station: spar tunnel + 4 bolt bosses · hollow · keyed snap lip aft + 2×M2 · socket fwd · pre-oriented · height 168 mm · pfus5 Fuselage section 5 / 7 — 440–497 mm · hollow · keyed snap lip aft + 2×M2 · socket fwd · pre-oriented · height 70 mm · pfus6 Fuselage section 6 / 7 — 497–578 mm · hollow · keyed snap lip aft + 2×M2 · socket fwd · pre-oriented · height 94 mm · pfus7 Fuselage section 7 / 7 — 578–737 mm · hollow · socket fwd · pre-oriented · height 160 mm · pwingL-1 Wing L segment 1 — η 0.01–0.40 · hollow+ribs · Ø4 pin sockets · Ø6.5 mm spar channel · pre-oriented · height 141 mm · pwingL-2 Wing L segment 2 — η 0.40–0.95 · framed servo mount (5 g sub-micro, 2×M2) · hollow+ribs · Ø4 pin sockets · Ø6.5 mm spar channel · elevon printed IN PLACE (3 cut-tabs on the hinge — free with a blade, hinge with tape) · pre-oriented · height 198 mm · pwingL-3 Wing L segment 3 — η 0.95–0.97 · hollow+ribs · Ø4 pin sockets · Ø6.5 mm spar channel · pre-oriented · height 13 mm · pwingR-1 Wing R segment 1 — η 0.01–0.40 · hollow+ribs · Ø4 pin sockets · Ø6.5 mm spar channel · pre-oriented · height 141 mm · pwingR-2 Wing R segment 2 — η 0.40–0.95 · framed servo mount (5 g sub-micro, 2×M2) · hollow+ribs · Ø4 pin sockets · Ø6.5 mm spar channel · elevon printed IN PLACE (3 cut-tabs on the hinge — free with a blade, hinge with tape) · pre-oriented · height 198 mm · pwingR-3 Wing R segment 3 — η 0.95–0.97 · hollow+ribs · Ø4 pin sockets · Ø6.5 mm spar channel · pre-oriented · height 13 mm · tip:L Left wingtip (winglet) — push-fit tab into the wing-tip slot — no glue · pre-oriented · height 61 mm · tip:R Right wingtip (winglet) — push-fit tab into the wing-tip slot — no glue · pre-oriented · height 61 mm · pin4 Alignment pin Ø4×16 — print QTY 12 — one pair per wing joint · 0.15 mm fit · pre-oriented · height 16 mm ASSEMBLY (≈15 min): 1. Cut the elevon tabs with a blade; hinge with tape (top surface). 2. Slide wing pieces together on the Ø4 pins + CF spar through the modelled channel. 3. Bolt each wing to the pod bosses (M2.5) — fully disassemblable: reprint only a damaged piece. 4. Drop servos into their framed pockets (2× M2), fit horns, close hatches. Inspired by the minimal-piece, glueless build philosophy of the GASB series by Carletto73 (thingiverse.com things 1659724 & 6365819). All geometry here is AeroGen’s own parametric output. Created with Ouranos github :
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
High-Speed UAV Landing Area Warning SignHigh-Speed UAV Landing Area Warning Sign A warning sign designed to alert people to a high-speed UAV landing area.
Halo Infinite - M808 Scorpion
Halo Infinite - Warthog Collection (M12 Warthog, M12R Rocket Hog, and M831 Razorback)Absolute Iconic and Classic vehicle! Download includes the Halo Infinite versions of the standard Warthog, Rocket Hog and the all new Razorback!
DIY yellow rc plane / бомжелет
GTA Weaponized Vehicle Pack(RC Shell)Same set of GTA cars, but you can make them as RC cars now. Note that this is still a WIP because the 3D slicing software has errors but you can check to see if you can clear them out on Blender.
Stealth BWB GK-01Model Created with GOKKUZGUN STUDIO
Filament Spool RackI had a huge problem with space and arranging my rolls of filament into some kind of order, I would end up with spools of filament all on top of each other and it was Murphy's law, when I needed a specific roll, it would be right at the...
K2 Plus Pro PTFE Tube Guide for the Drag Chain - NO BINDING!!EASY INSTALL - I got sick of the stock one binding up all the time, the tube getting stuck, and all the other ones I tried kept breaking. So I got fed up and made one myself!
Filament Storage BoxFilament storage box designed to keep moisture out.
Sparkx i7 Miracle PTFE Tube Remover ToolDesign Concept The Sparkx i7 Miracle PTFE Tube Remover Tool is designed for easy and efficient removal of the PTFE tube from 3D printer extruder assemblies.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.