Printables
Strong Corner Bracket
I designed a corner bracket that supports three faces. Over the past few months, I’ve seen many designs of this type, but none matched the design I had in mind, so I decided to make my own.
- Creator (as listed at the source)
- BaGooN
- Licence
- Creative Commons — Attribution — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STEP STL
- Pricing
- Free
- Published
- Category
- Mechanical Parts
- Likes
- 307
- Downloads
- 626
Overview
I designed a corner bracket that supports three faces.
Over the past few months, I’ve seen many designs of this type, but none matched the design I had in mind, so I decided to make my own.
In other designs, when one face is placed flat on the build plate for slicing, the remaining two faces end up with layers stacked horizontally relative to the build plate, making them weak along the layer lines. To solve this problem, the bracket was designed to align the layers of all three faces, ensuring uniform strength throughout. This increases the cross-sectional area of the layers on all faces, improving layer adhesion and enhancing overall strength.
This is a truly strong corner bracket.
For reference: Does Angled 3D Printing Really Make Parts Stronger? by CNC Kitchen
Notes:
The size is 50×50×50 mm, with a thickness of 4 mm. It’s designed for 3–4 mm screws.
This design includes a built-in brim to improve first-layer adhesion. Please trim it off as needed.
Added 20x20x20mm size, 3mm thick version.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Modular Mounting SystemThis project is a mounting system for lightweight objects such as phones and small cameras. The joint is compatible with GoPro mount. Phone clamp assembly video: If you find this design helpful, consider to support my work.
Parts Tray DrawersSuper Simple to print trays and holder. 1,2,4 compartment trays. Can & SD card for scale. Internal tray dimensions: 77mm x 55mm 38mm x 55mm x2 38mm x 27mm x4
Parametric HingeParametric Butt Hinge This is a parametric butt hinge designed in OpenSCAD, offering a wide range of parameters for customization.
NUT JOB | Nut, Bolt, Washer and Threaded Rod FactoryGenerate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into customizer.
Hand-Screw ClampThis is a proof of concept of a new thread design which can make a hand-screw type clamp, commonly used in woodworking.
Customizable Sanding Stick
Yet ANOTHER Machine ViseThis is a quite robust 3d-printable machine vise. It's 100% 3d-printed - no screw or other piece of hardware is needed to hold the individual pieces together. Pieces clip and snap together.
3D Printable Jet EngineA cutaway model of a 2-spool high bypass turbofan. I designed the whole engine from scratch with cues to certain existing engines. For example, I think Rolls-Royce makes the best-looking fans, so there's some resemblance there...
Battery dispenser dual : AAA & AA
G-Clamp fully printableSmall G-Clamp fully printable without support. Additional a larger frame and screw is provided which adds another centimeter. The protector can be reused for the larger clamp.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.