Thingiverse
Ender 3 and 3 V2 Filament Guide - GO BIG - No Screws - No Supports
- Creator (as listed at the source)
- Markacho
- Licence
- Creative Commons - Public Domain DedicationStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 4,040
Overview
No supports No Screws (all parts and installation are just a simple press fit) The extra deep groove dominates even the most unruly of filaments! STL and FreeCAD files provided For Ender 3 and Ender 3 V2 The bracket is just a press-fit onto the z-carriage, with moderate effort until it is seated. Firmly push the bracket all the way onto the Z-axis carriage (the cutouts wrap around the axle spacer and nut). The 2 half-rings are a press-fit onto the bearings. You can just use your hand, but I found that using a flat surface helps to press the parts nicely onto the bearing. You will need a 608 bearing (one of the most commonly available bearings, used for skateboard wheels and other things). When installing on the printer, make sure that the Ender 3 (or V2) nut has one of its flat sides at the top. This will give you the clearance for a nice snug fit. UPDATE: To help with modifications, in addition to the FreeCAD (original) files, I've included STEP files.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Turtz 1.75mm Filament Clip with a Satisfying SnapSmall clip that sinks it's jaws on the spool and holds the end of the filament to prevent it from unraveling. The filament can be satisfyingly snapped into the central slot, or just slide it through one of the 2 holes.
1.75mm Filament Clip - Universal Small and Large
Another filament clipDescpription: Another filament clip for 1,75 mm filament spool. It's more tight and fits on the most of the filament spools.
Mini Filament ClipVery small but usefull Filament Clip printed in vase mode Version 1.1 14 I 2025 Uses around 0.4 gram of material This is my basic filament clip I use Can hold up to 4 strings Model is for 1,75mm filaments If you want to use it with 3mm...
Z-Rod Plugs (Anet A8)Just a simple Z-Rod plug I created to fill the gap.
Assorted Filament Clips (1.75 mm)Each clip is designed to fit each unique brand of spool. It was designed for a .3 mm nozzle. It makes two perimeters with no fill. It may work with a 0.4 mm nozzle but I have not tried it yet. These are for 1.75 mm filament.
Filament Holderfilament holders, 2 designs v2 The clip doesn't hold very tight, it can move around the spool. Wherever the end of the filament is, you can drive it to there. Pretty handy for the waiting spool. v3 Very simple design. Just paste it.
Shelf Clip Filament Rail V2An upgrade of my old Shelf Clip Filament Guides. This is designed to guide filament down from a roll on a shelf above your printer, without it damaging the edge of the shelf or dragging the filament roll sideways.
Filament Clip v4I designed it according to 3mm thickness filament spools.
Bambu Spool Filament Clip (1.75mm - Fast Print)Bambu Spool Filament Clip (1.75mm – Fast Print) Ein kompakter, passgenauer und extrem stabiler Filament-Clip für originale Bambu Lab Spulen.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.