Thingiverse
Go Pro Nerf Mount (UPDATED)
- Creator (as listed at the source)
- NerdKing
- Licence
- Creative Commons - Attribution - Non-Commercial - No DerivativesThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Camera
- Likes
- 515
Overview
This is a GoPro mount for most Nerf guns. If you have seen some of the other go pro mounts they do not have a place for the nut this model already has this included. If your 3D printer does not have good resolution you might want to have some sandpaper and a caliper ready the mount has to have low tolerance. Your fellow Engineer, NerdKing enjoy! (tips appreciated) I noticed some mesh problems with the model, those should fixed in the v2 model. Blaster Image by cw360
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Nerf Gopro Mount (No Supports)This model lets you mount your action camera (like a gopro) on the rail of a nerf gun. No Support Generation required. Use 100 percent infill. Tested and tweaked to perfection.
GoPro HERO5/6/7 Cold Shoe Microphone MountGoPro HERO5 Cold Shoe Microphone Mount A simple cold shoe mount for the GoPro HERO5 Black, designed to make it easy to attach an external microphone or other cold shoe accessory directly to the...
LiftPod - Multipurpose Foldable StandThis is a multipurpose stand to mount cameras, phones, Nintendo Switch, or tablets. The clamp is compatible with common Arca-Swiss style camera tripod plate. It's fully printed.
Very simple cablecam dolly for GoPro Hero3English If you enjoyed the cablecam dolly, you may also like my "terrestrial dolly" If you find my design interesting, you could make a small donation: This is a very simple system to create a cablecam dolly with a GoPro camera.
Harrope Cable Cam GoPro v1.0CHECK OUT OUR NEW SLIDER MOTORIZED!! Follow us: Designed by Guillermo Maroto How does it work? Engage your camera with the adapter (compatible with GoPro and screw), join the adapter with the cable cam, adjust the angle you want, press...
GoPro to tripod mount adaptorThis is an adaptor to convert a GoPro mount (either side) to a standard 1/4-20 tripod mount.
GoPro Baseball Cap MountI started filming my airsoft games and practices for fun and I needed a good sturdy mount that would go on my airsoft baseball cap to hold my Xiaomi Yi (or GoPro compatible) camera.
Modular Mounting System Arms - Customizable
GoPro Sidebar MountNew and updated files are now available at (always for free, obviously!) If you dont have enought space for the knobs, you gonna love the sidebar mount. having the camera on the same side of the knob let you mount your camera everywhere!
Medium Dog Camera HarnessI wanted to have my dog to wear a rollei action camera. I found thing:1001901. I liked it, printed it and it worked, but I had some ideas how to improve it. First, I wanted to fasten the straps not crossed.
SELFIE-STIKThis 'Selfie-Stik' is completely 3D printed in multiple parts. It's easy to assemble, folds away to a compact size that fits in the palm of your hand but extends out to approx. 37.5cm in length.
GoPro Headrest MountStill a work in progress but here it is. This is a gopro mount that clamps down on the bars of the head rest in your car.
Small-Medium Dog GoPro/Camera Harness-MountSmall-medium dog Gopro Harness-mount. First print a little rough but works. Printed in PLA.
GoPro camera backpack supportEnglish: Simple bracket for attaching a GoPro camera to a backpack strap. The holder is attached with Velcro tape by passing through the holes in the housing base and embracing the backpack strap.
Electric_Driver_Upgrade_For_Slider_V4.0Material： 1. Professional_DSLR_Slider_V4.0 2. 3D print parts； 3. Arduino mega2560; 4. Customed made circuit board; 5. 0.96’ 12864-OLED ;(CCD1306) 6. DRV8825 Stepper driver ; 7. GT2 timing belt ;(length:1.5m Width:6mm) 8.
GoPro Mount CornerExtension with standard GoPro connection with center distance between holes of 45 mm. Lightened and connected at critical points. The deformable point is near the pair of fins (not certified).
GoPro to Mobius MountBased on other GoPro to Mobius mounts on Thingaverse, this mount allows 90 degrees or greater rotation by lengthening the lugs. This mount was designed with the GoPro Sportsman Mount as the primary application.
ThingPro - 3-Way Seflie StickThingPro - The 3D Printed 3-Way Selfie Stick This is selfie stick that I designed for use with my GoPro Hero 6 Black but it can potentially be used for any camera or phone with the proper mount.
GoPro Attachment systemGopro Attachment system A flexible attachment System for GoPro compatible equipment. Including 7 different rod lengths. NB: New uploads 27. dec.
G-Clamp GoPro Mount & ClampI guess no one have enough clamps :) The long Thread and clamp body is longer than the G-Clamp, I made it longer in order to be able to mount the camera on thicker items.
Segmented and Spiraled Tripod for Gopro, Phone and Anything You Got
Raspberry Pi Camera Case, GoPro Mount CompatibleRaspberry Pi camera case is GoPro and Modular Mounting System compatible. There are two different backs; BACK1 will mate cleanly with the mounting tabs and presents a more finished look, but it requires supports, BACK2 prints without...
Slider Harrope S120 & X60 & X120Check out our new motorized camera slider for DSLR Follow us on facebook facebook.com/harropecam harrope.com - Camera accessories BOM and more information: Chek the new slider motorized.
Camera Tripod Mount PlateI needed additional mount for my tripod to use multiple cameras and camera slider, so I designed and printed it.. The video shows how I designed and printed this part.
Mavic Air 2 GoPro camera mountThe top is a favorable location for ease of takeoff and landing, however, can cause interference with GPS. Thus, always update Home Point before installing the mount. Made to accommodate shrinkage in PLA.
Case GoPro Hero 5Simple cases for GoPro Hero 5, with and without support option and protector for the lens and the LCD. PS: If you print this thing, let us know! Thank you very much! =)
Camera to Rail Mounts
Backpacking - tripod for camera 1/4 screw
CAMERA / GOPRO ARTICULATED SUPPORTThis set of components allows the attachment and adjustment of a camera. The fixing can be done by means of a clamp or it can be posed by a base.
Action Cam "Bobber"Make sure all the walls are waterproof (hollowed). A layer of paint or epoxy resin will make it save :) Have Fun ! 3Dsection.de
Chest Mount Harness_ GoProThis is my design for make your own chest harness. - Efficiency - Simplicity - Less material Take a GoPro and enjoy!
GoPro Quick Release mount for Sony Action Cam AS100VFor those who had a GoPro and now are using the sony action camera AS100V. Screw: 5/32" - 3,95 mm of diameter more or less and 5/16" - 8.2 mm of length. Don't know exactly because I just found it inside an old screws box.
Dolly trekking poleEnglish The final cane for lovers of trekking and video from original points of view. The cane in a Leki Sierra Photo, which an axle with 2 wheels skid, an anchor for a GoPro camera or the like and an anchor for the smartphone, which...
QR Plate for MeFOTO Tripods (Backpacker and RoadTrip)
SJ4000 Lens cap, skeleton and small handleSJ4000 compatible lens cap, depending how accurate your printer is this should fit, otherwise might need tiny bit of scaling.
Gopro Mask MountThis GoPro mount is copied from the Scubapro model. It's a universal support for snorkeling or apnea masks, easily mountable with an electrician plastic band.
Tripod (small)Tripod for camera. There is a hole in the "plate" where a standard camera screw will fit. Gopro mount can also easily be glued to the plate.
GoPro PlugAre you annoyed from your action camera that is not capable to record the things that happen behind you in a satisfying way?
GoPro GimbleI recently won a Nobel prize for shakiest go pro footage ever and decided I should try to fix that. I designed my own gimble in Fusion360 and thought others might find it useful. Any questions, just let me know.
DSLR camera Stand with GoPro atatchmentA camera Stand for DSLR cameras. All Screws are GoPro attachments screws. Use a 5mm threaded tool for brunching up the threads in the mount. Use 5x25mm screw with hex head in the ScrewHead5mm part.SliSearch lists public model details and links to the original source. It does not host files or verify licences.