Printables
Snapmaker U1 Toolbox Tray
Model on OnShape: I printed the model with black PETG. The model needs to be placed at 45 degrees angle to fit. 10% infill grid. 2 bottom shells 4 top shells Actual print time was 2h 35m 35s.
- Creator (as listed at the source)
- Gur Telem
- Licence
- Creative Commons — Public DomainStated at the source marketplace; SliSearch does not verify licences.
- File types
- 3MF STEP
- Pricing
- Free
- Published
- Category
- Other Printer Parts & Upgrades
- Likes
- 217
- Downloads
- 2,693
Overview
Model on OnShape:
I printed the model with black PETG.
The model needs to be placed at 45 degrees angle to fit.
10% infill grid.
2 bottom shells
4 top shells
Actual print time was 2h 35m 35s.
Use the screws from from the Z axis that you removed while you unboxed the printed to hold the tray.
Printables refuse to accept the gcode I printed so I compressed it and uploaded it as "Other Files"
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Ender 3 sliding tool trayThis item will not fit on ender pro versions Simple attaching tool tray with sliding feature that could be easly fitted on without removing any part, it will mount in or out in seconds (watch video below) It will cover the hole under the...
Snapmaker U1 ACE Pro USB-C Rear CoverReplacement rear cover for ACE Pro with integrated USB-C port for Snapmaker U1 connection. No drilling. No permanent modifications.
Snapmaker U1 Mainboard & PSU Cooling Brackets for Noctua NF‑A9x14 Fans + Chamber Insert/DividerThis project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics...
Snapmaker U1 – Feeder CoverSnapmaker U1 – Abdeckung für die Feeder-Langlöcher Wer die Feeder seines Snapmaker U1 nach hinten versetzt, hat anschließend die offenen Langlöcher der originalen Befestigung im Gehäuse.
Snapmaker U1 Stepper Motor Driver/Mainboard CoolerThis is a dual fan bracket/module that allows installation of 2 50mm fan to optimize cooling of the Stepper Motor Driver/Mainboard for the Snapmaker U1.
Snapmaker U1 Handle replacementThis replacement handle for the Snapmaker U1 door improves ergonomics by allowing a comfortable grip from both the left and right sides.
Snapmaker U1 driver cooler for slim laptop turbine fansDell Laptop Blower Fan Adapter This cooling duct is designed for the Snapmaker U1 and uses a Dell laptop fan (model DC28000K9D0 from probably old 2012 Vostro) to provide direct airflow over the stepper motor...
Tapo C120 camera holder for Snapmaker U1Enhance your remote print monitoring setup with this clean, custom-designed camera mount for the Snapmaker U1 , specifically engineered to hold the TP-Link Tapo C120 smart security camera.
Armrest Tray for Thomasville GilroyThis model is fitted to the Thomasville Gilroy sofa/couch/lounger but will work with any armrest with an approximate width of 180mm (7"). Optimized to print on the Snapmaker U1.
Filament Guide for Ender 3 v2 / Pro / NEO / CR-X Pro (NO EXTRA NEEDED)SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.