The manufacturer did not install the standard bottle holder mount threads on the frame of this bike but I found an unused thread on the bottom.
File types: STL
YouMagine
Bike Bottle Mount
- Creator (as listed at the source)
- Not listed at the source.
- Licence
- Personal use onlyThe marketplace does not list a licence. Check the source page before using the model.
- File types
- SCAD STL
- Pricing
- FreeThe marketplace does not list a price. Check the source page before downloading.
- Published
- Not listed at the source.
- Category
- Not categorized at the source.
Overview
Moved over from Takerbot's Thingiverse...#Unfortunately, all the images were cropped by YouMagine :(Though it was primarily created to hold standard, mini PET bottles, it can be tuned to fit any other type of bottle too. Some features: - only one part to print - completely configurable - bottles can be put in upright or upside-down - mounting bracket supports flat or round surfaces - optional cutout for front derailleur clamps - mount it with screws or - mount it with zip-ties (linear or radial) - more than 30 variables to play with --- MEASURES The default values in the OpenSCAD source file perfectly fit several 0.5l, 64mm diameter PET mini bottles. I am not sure about international standards, but at least almost all our German 0.5l bottles ("Mehrweg-" and "Einwegpfandflaschen") will fit. You only need to modify/tune the mounting options (frame diameter, screw parameters, etc...). bottle - diameter, mid - diameter, top (for upside-down usage) - length (usually 1/2 up to 2/3 of the bottle) bike - frame diameter - screw distance - screw diameter - screw head or washer diameter - frame nut diameter - frame nut height Keep an eye on the screw position (height) and bottle size and make sure the bottle cage will fit. OpenSCAD It is highly recommended to set the variable SHOWCUTOUTS to "1" and disable PUTINPRINTPOS (set to "0"). This will turn on some "debug" (cutout) objects and show the bottle cage in its normal position: SHOWCUTOUTS = 1; // show cutouts: 0/1 (off/on) PUTINPRINTPOS = 0; // enable preferred printing pos. It would not make sense to describe all the OpenSCAD parameters, here. The source file contains a description for each of the variables and most of them should be self-explanatory. If something is unclear, modify a value and observe the changes in the 3D view. For STL export, set: SHOWCUTOUTS = 0; // show cutouts: 0/1 (off/on) PUTINPRINTPOS = 1; // enable preferred printing pos. PRINTING If these two variables are equal, this thing can be printed without any support: clampExtTop = 0.0; // length extension (top) frameExtTop = 0.0; // length extension of frame mount (top) I printed all by bottle mounts with an infill value of 30%. MOUNTING - a bit of rubber tape (insulating/elecrician's tape) is highly recommended, especially for the zip-tie version. - ...
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
I was unsatisfied with most of the printable bottle cages because they usually only fit one specific bottle/can size and do not “grip” smaller bottles.
File types: STLLicence: Personal use only
PrintablesFree
I purchased some Canyon water bottle side loader cages to use with a half-frame bag but didn't realize that you need one of each direction in order to have 2 that load from the same side, so I designed one that I could print to have one of...
File types: STEP STLLicence: Attribution
PrintablesFree
This small low-profile adapter sits in-between the bike frame bosses and the bottle cage and allows shifting up or downwards by 12-51 mm.
File types: STLLicence: Attribution
PrintablesFree
Enclosure for Ugreen Finetrack G (Rechargable) mounted under a bottlecage Ideally printed in ASA Filament for UV resistance (ASA > PET > PETG > Everything else) This requires a longer M5 x 25mm bolt to be mounted...
File types: STLLicence: Attribution
PrintablesFree
zip tie it to your bike, holds the smaller size owala bottle
File types: STLLicence: Public domain
PrintablesFree
Description: This is a customizable name plate to attach to the bottle holder mount on a bicycle. I just bought 2 e-bikes and wanted to put a "GPS PROTECTED" warning on the frame to avert theft.
File types: 3MF SCADLicence: Marketplace terms
MakerWorldFree
Just a simple water bottle holder for bikes. Default sizing is designed to hold the cheap and durable IKEA 365+ water bottles with a diameter of 66mm(which also seems to be the size of most common 0.5L water and soda bottles in the EU)...
File types: 3MF STLLicence: Personal use only
PrintablesFree
An alternate way to mount a water bottle cage on a bike UPDATE: V2R2 also broke, and it was rotating, which was annoying. So, I did another, stronger one with a tab that notches into the clamp, to prevent it from rotating.
File types: STLLicence: Personal use only
PrintablesFree
Bike/Trike customizable license plate that is glued into a modified bottle cage mount. Mount is attached with two zip ties - adhesive backed foam can be added to prevent slipping.
File types: 3MF STLLicence: Personal use only
PrintablesFree
Accessory mount for bikes/trikes that don't have mounting bosses or if you want to mount your things elsewhere. This works by using two zip ties to attach the mount to a 1" frame tube.
File types: 3MF STLLicence: Personal use only
PrintablesFree
DE: Man kennt es: Die Tour ist geschafft, das Fahrrad steht und jetzt fehlt nur noch die Belohnungszigarette. Genau dafür habe ich diesen kleinen Zigarettenhalter konstruiert.
File types: STLLicence: Marketplace terms
MakerWorldFree
This project is designed for a 40° and 45° angled BTS (Behind-The-Saddle) bottle setup, providing a compact and angled position for your hydration bottle behind the saddle.
File types: STLLicence: Marketplace terms
Cults3DPaid
I quickly made this as a quick fix for my brother in tinkercad its a cage mount to span across aero bars for his triathlon practice bike but he said it has held up well with very little added weight.
File types: STLLicence: Public domain
PrintablesFree
editable tablet holder for eletrolites and calcium.
File types: F3D GCODE STEP STLLicence: Attribution
PrintablesFree
A cup or bottle holder with a mount to enable person with disabilities to have their drink close to them mounted on a table. The modular design enables that anyone can mount it.
File types: SCAD STL
Slide this on your UE Boom2 so it fits in a bicycle bottle holder. Protects and sound is still good.
File types: STL
The mount is 250 mm long so you have to turn it probably. Print in standing position with support. Here is a screencast about the design process: Update #20170223 #1: I made another version which using lock clips to mount the holder to the...
File types: STL
Print instructionsPrint one each of the Main Body part and End-Stop part. They were designed to be printed in PLA, using 0.3mm layer height and 30% linear infill. No support material is required.
File types: STL
Compatible with most PET bottles (=28 mm neck diameter). Printable without supports.
File types: STL
Bottle Holder for the bike, assemble with a M3 15 screw and a M3 Locknut.
File types: F3D STEP STLLicence: Personal use only
ThingiverseFree
NOTE: Currently being revised. Check back soon for update :) Bike frame mount for gopro. Hole for frame is elliptical, 35.5mm x 41.5mm. Bolt holes are to suit M3.
File types: STLLicence: Attribution
ThingiverseFree
Universal bottle cap tripod for cameras and cellphones
File types: STLLicence: Attribution
ThingiverseFree
No support materials needed. For a stronger build, make 4 passes perimeter walls. Optimized for the gyproc anchors' 1/4" screws.
File types: STLLicence: Personal use only
ThingiverseFree
Your wished logo isn't available? Ask me! Maybe I make it. ;-) I have created a helmet hook, which has a wide contact surface so that the padding of the helmet won't get damaged.
File types: STLLicence: Personal use only
PrintablesFree
A nice handlebar mount for cylindrical flashlights. Currently the bar mount has an ID of 25.5mm and the flashlight clamp has an ID of 23mm.
File types: STLLicence: Attribution
ThingiverseFree
This is a universal clamp to mount my phone to my bike. The base can be attached to the bike with some zip ties. The knob and slider are the same as in jakejake's design:
File types: STEP STLLicence: Personal use only
ThingiverseFree
I’ve added a custom Air Vent Insert tested on a 2010 Lexus GS350. It clips securely onto the dashboard air vent louvers and works as a mount for the adjustable phone clamp.
File types: 3MF STLLicence: Share the source
PrintablesFree
This is a GoPro mount designed to float. The part was designed to accept 3 standard bottles. Without an o-ring, the threads are not air-tight but the seal is sufficient to keep water out when floating on the water.
File types: STLLicence: Attribution
ThingiverseFree
This model is an improvement of the modular system by yyh1002 Description : This model's goal is to add more flexibility to the phone holder of the modular mounting system by yyh1002.
File types: STLLicence: Attribution
ThingiverseFree
A wall mount to store your bike in a space-saving AND stylish way
File types: 3MF STPLicence: Personal use only
PrintablesFree
Hey Guys, this is my verison of a bottle holder for my bicycle. Print time is ~3h and 20m of filament will be printed. I printed with 0.3 layer hight and high velocity. Inner diameter is 72mm. You should check if your bottle fits in.
File types: STLLicence: Personal use only
ThingiverseFree
This cupholder has a way better point of gravity for better functionality of the gyroscope. NEW: LOWER ATTACHMENT (50°)
File types: 3MF F3DLicence: Marketplace terms
PrintablesFreeSliSearch lists public model details and links to the original source. It does not host files or verify licences.