Thingiverse
DOGGO - simple robot dog
- Creator (as listed at the source)
- Ezojil
- Licence
- Creative Commons - Attribution - Non-CommercialThe licence is listed by the source marketplace. SliSearch does not verify it.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Hobby
- Likes
- 809
Overview
SIMPLE ROBOT DOG This is a prototype, work is ongoing!
Print this model with Slicience
- Download the model from the source page.
- Upload the file to Slicience and get a quote with Prinnu.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Spotmicro - robot dogI designed Spotmicro inspired by the Spotmini of Boston Dynamics. It works on the basis of the Arduino mega, and if you use a different board, you have to redesign the 'plate' file yourself and print the 'non-mega' file instead of the...
Robot dog, quadruped robot, 12DOF, 3DOF per legSmall robot dog inspired by Boston Dynamics, Petoi Bittle and a lot of other projects. #Disclaimer Project closed, see more in GitHub or instructables.com #Instructions - How to print and connect all together: - Servo and legs calibration...
ESP32 BT Robotic Arm with High Torque Servos + Android App
ESP32 quadruped robot (laser cut+3d)
Spider robot(quad robot, quadruped)-SG90If you need get any support from me, would appreciate to make a donation: Instruction guide: This is a quad robot that built by 3D printer and power by Arduino.
Robotic arm: arm (part 3/3)This is the third, and last, file publish of my robotic arm series. This component is the arm of the robotic arm.
"Neurobot 1" - Arduino, Raspberry Pi, Linux and ROS educational robotics kit
6DOF ROBOT ARMGo to my Hackaday site in order to download the latest design! This robot arm is an Open Source and printable robotic arm with six degrees of freedom, designed using Spaceclaim.
The GreyhoundFinally I have finished this 1 year project. what I came up with is a lightweight greyhound that you can control with an arduino and 8 servo's I bet there are better programmers out there that can make it walk even better and smoother.
Tridibot Quadruped Arduino and ESP8266 Robot
KINEO QuadrupedKINEO ist ein Roboterprojekt aus Deutschland Die Servos werden mithilfe eines Arduino Uno angesteuert welcher per I2C mit einem Raspberry Pi (Model A, B oder später B+) kommuniziert.
Servo arm's mg90sMG90S Servo Horns / Arms Pack Looking for high-quality, reliable servo horns for your MG90S micro servo?
Firefighting Robotic Arm with Integrated Hose RoutingThis 3D printable robotic arm is designed for firefighting robots, water spraying systems, educational robotics, and custom automation projects.
Servo Ultrasonic Sensor Mount – Adjustable HC-SR04 HolderA compact 3D-printable servo mounting system designed for the HC-SR04 ultrasonic distance sensor. The mount allows the ultrasonic sensor to rotate with a servo motor, making it suitable for Arduino robots, obstacle detection systems...
3D Printable Robotic Arm – DIY, Low Cost, Lightweight & Easy Assembly3D Printable Robotic Arm – Simple, Low-Cost & Sophisticated Design This is a 3D printable robotic arm designed with a focus on simplicity, low cost, easy assembly, and a sophisticated modern design.
AT-AS quadruped (or hexapod) robotThe "AT-AS" (All Terrain - Anita Scout) is a printable quadruped robot. The AT-AS is a project of an efficient robot, as it has achieved a useful and complete walking robot base using few technical and economic resources.
XLRobots.com's X1 Opensource Female Robot CompanionXLRobots is proud to introduce the X1:Female Robot Companion. A life size 100% 3d printable robot. This is a robot project that will be free to the public from the creative minds at XLRobots.com.
AR4 Robot Servo GripperThis servo gripper is designed for the AR4 robot arm but can be used for any robot or pick place operation. It uses a 25kg DS3225 servo and is built from 3D printed parts.
Robot arm - Project WAYProject WAY is a humanoid robot arm free for 3D printing and is an intermediate project that includes just a few screws and zero glue!! Have fun with your assembly and use! Assembly instructions: Email me if anything doesn't make sense.
CyberHand ● Robotic Hand for CyberBrickFive fingers. Four servo channels. One printed differential to reconcile them. The CyberBrick receiver gives you four servo channels. A hand has five fingers.
Heavy-Duty 20×15mm 3D Printed Cable Chain – Flexible Cable Carrier & Drag Chain20×15 mm 3D Printed Flexible Cable Chain – Cable Carrier for Moving Systems ⚙️ Compact Design. Controlled Movement. Organized Cable Management.
M3 40T Spur Gear | 10mm Bore | STL | STEPSpecifications Gear type: Spur Gear Module: M3 Number of teeth: 40T Pressure angle: 20° Pitch diameter: 120 mm Outside diameter: 126 mm Bore diameter: 10 mm Face width: 20 mm Tooth profile: Involute File format...
ESP32-CAM Camera Stand and Mount – 3D Printable STLESP32-CAM Stand and Mount This 3D-printable stand is designed to securely hold an ESP32-CAM module and keep the camera stable during electronics, IoT, robotics, and computer-vision projects.
Servo Linear Actuator – Rack and Pinion MechanismModelo de actuador lineal accionado por servo motor, basado en un mecanismo de piñón y cremallera (rack and pinion).
Highly Configurable Wheel (One Wheel To Rule Them All)
Kame: 8DOF small quadruped robotKame is a little quadruped robot based on an ESP8266 WiFi module. It has 8 servos (two per leg) and a small LiPo battery. It can be programmed with Arduino.
Autonomous-Webserved-Tanktrack-RobotStart a new project merging several skills in one task. This is my tank track robot controlled by a Raspberry Pi using a webservice. You can control the robot over dynamic website with webcam view.
Compact Robot Arm (Arduino) - 3D PrintedA Detailed Parts List can be found in the description of the YouTube Video below. Detailed Assembly Tutorial: Showcase YouTube Video: Hope you can have some fun with this arm!
Serv-ArmRobots, so fascinating... This is a robot with the ability to learn a sequence, and repeat ad infinitum. You can control it, in live mode, for a distance handling. Or, record a sequential movements and play it as needed.
SMARS QUAD MOD--- Introducing the SMARS Quadruped! Transform your SMARS robot into a fully functional quadruped with this exciting modification.
MeArm V0.4 - Pocket Sized Robot ArmThe MeArm is a low cost robot arm. It is designed to be light weight and inexpensive - to be the perfect introduction to robotics.
Printable Robot ArmThis is my first try to build a printable robot arm. I was inspired by the demo of zortrax, but it's my own design. It is not tested yet, I'm still printing. It should fit together but.
Servo driven tracked rover w/suspensions (self tightning belts).3d printed tracked rover from Lynlim Nesneros on Vimeo . There are ment to be glued on some rubber square`s at the flat side of the tracks You need: Filament Glue Self tapping screws with a wide head M5 screws (do not use any countersink...
Linear actuator with stepper motor from cd/dvd optical drive[UPDATE] There is my upgraded model with integrated limit switches: In most cases all the parts required to build this can be found in computer optical drives, but I also added a version with linear bearings instead of brass bushes(not all...
PrintBot RhinoThe *PrintBot RHINO* is an educational robot that can push objects with its dozer and take part in "sumobots fights".
MR - 4 : Robotic TankMy latest tankbot has been designed to be a larger vehicle but printable on a small scale printer. A number of issues with the other tanks have been overcome (hopefully) with this one.
POZER. 5-axis robot armDo not do that. This is a prototype. It's not ready yet Video: Boosty:
Animatronic Eye MechThis is a simple servo controlled animatronic eyeball that uses 2 servos. The eye can look left and right and the top eyelid can open and close. you can drive 2 eyeballs with a servo Y cable.
MiniSkybot Robot V1.0The MiniSkybot is a new mobile robot aimed for educational purposes. It has three new important features: 3D-printable, fully open-source (mechanics + electronics) and designed exclusively with Open source tools (OpenScad, Freecad and...
Humanoid Robotic HandThe hand files are part of a larger project which has taken around two years. The project is an entirely 3D printed humanoid robot similar to the inmoov project but with many major differences in design.SliSearch lists public model details and links to the original source. It does not host files or verify licences.