Printables
Clip for Measuring Bed Height on Boss HP Laser Machines
- Creator (as listed at the source)
- BFree_42
- Licence
- Creative Commons — Attribution — NoncommercialStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Tools
- Downloads
- 2
Overview
This is designed to vertically hold a caliper on to the lens assembly of a Boss brand laser, so you can measure the distance from the lens to the bed. By measuring that distance in different locations you can see whether or not your bed is level.
Will this work with my calipers?
Most caliper brands seem to have the same end width (see pics), but different brands have different doohickeys on the end that stick out and can interfere with fit. The "Non Brand Specific" model should fit most caliper models because it relies on the end width, and has plenty of room for doohickeys.
Don't drive lens too far LEFT with calipers attached!
The calipers can bang against the laser and bad stuff can happen.
What are Vinca calipers?
One of the various caliper models from Amazon that our makerspace happened to get. #NotSponsored
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Gridfinity Caliper Tray 6x2x3 - L-shaped, stackable, with pen holderTested to fit a Mitutoyo 500-196-20 caliper and a cheap clone. Has some extra space around to have a good chance of fitting various clones. The pen pocket has a deeper end on the right side, so you can press down on the end to lift it up.
Laser Cut Paper Calipers with Imperial and Metric VernierThis is a remix of thing 26258. It's a wonderful design, but the inches vernier is misaligned. I fixed it!
laser cut 12 inch rulerThis is a 12 in ruler. This is a Corel X7 file. made at American Laser Cutter
Fixed Wrench OrganizerAn 8-place wall-mounted fixed wrench organizer that can be printed in 3 parts, in one piece or laser cuted.
Laser Cutter/Engraver with laser cutted and 3D printed partsThe laser cutter/engraver was made of plywood and 3D printed elements. Plexi can be used to increase construction strength.
Tresure chest - lasercutThis box is 10,5 cm high 9,5 cm wide and 13,5 cm long. It is made of 4 mm wood. For open and close the cab you need two to four hinges. One side of the hinge should not be bigger than 6 mm.
Extensible Combination Wrench RackKeeps combination wrenches organized on the wall or peg board with interchangable subcomponents with laser-cut labels that cover the mounting screws.
Hangable Organizer RemixThis is a remix of the hangable organizer from FablabTorino. I love the design but had to redo the whole thing to fit my needs and make it so my K40 cutter from China could handle the size (maximum of 31x22cm).
CALIPER CENTER DISTANCE ATTACHMENT - (Tested)The must have tool for your workbench !!!
Skadis Caliper MountA simple caliper mount for Skadis boards. It is designed for analog calipers and will probably not fit digital calipers.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.