MakerWorld
Makera Vacuum Nozzle
A Long Nozzle for the Makera Vacuum. I made this to reach better inside of my Makera Z1 because the original nozzle is way too big to get in all those nooks and crannies.
- Creator (as listed at the source)
- Fab_ster
- Licence
- Standard Digital File LicenseStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- FreeThe marketplace states no price. SliSearch shows it as free; check the source page before you download.
- Published
- Category
- Other Hobby & DIY
- Likes
- 1
- Downloads
- 3
Overview
A Long Nozzle for the Makera Vacuum.
I made this to reach better inside of my Makera Z1 because the original nozzle is way too big to get in all those nooks and crannies.
You need my Makera Vacuum Tube adapter to use this!
The tube adapter can also be used with the original nozzles from Makera.
Also take a look at my other Makera Vacuum Accessories!
Makera Z1 90deg Air and Vacuum Adapter
Makera Vacuum Hose Adapter
Makera Vacuum Splitter
Makera Vacuum Hose Cuppler
Boost Me
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Makera Vacuum Hose AdapterThis is a hose adapter for the Makera vacuum hose. The hole is bigger than the original hose ends, so it’s more efficient as it doesn’t restrict the airflow as much as the original one.
Makera Vacuum SplitterThis is a Splitter for the Makera Cyclon Dust Collector Lite. It's a convenient way to switch between the machine vacuum port and a vacuum hose to clean the machine after you finish a job. Just turn the knob and you are done.
Makera Tool HolderI made this to organise my makera stuff and have everything easily reachable at the same place. It's working fine so far. It might need some tweaks here and there but it does the job I designed it for.
Makera Z1 Cyclone Dust Collector FilterMakera Z1 Cyclone Dust Collector Filter The filter included with the new Makera cyclone is…fine. However, after several laser engravings on wood, my particle counter measuring PM1, PM2.5, and PM10 was constantly high.
Makera 3d Probe - 1x1 Gridfinity BinGridfinity Holder for the Makera Z1 3d wired Probe The photos don't show it since I am lazy. But the model is updated to include all the collet adapters…oops ! Built off of this gridfinity template
Makera Z1 Karcher adapterPrint tilted at 45 degrees with organic supports (see image attached). I recommend PETG at 0.15 layer height, 3 perimeters.
makera Z1 long elbow extraction connectorI made this long elbow connector hose to allow easy disconnection of the extraction hose to use it as a vacuum in the build chamber and quickly reconnect it without having to reach the back of the machine or moving it every...
Vacuum Hose Adapters for 1.25" Hose and Makera Z1Generated from . Here are two adapters useful for connecting this hose between a Makera Z1 and a 3D-printed cyclone (I used this . The small end is removed from the hose and replaced with the elbow adapter.
CAMLOCK Adaptors (in 0.5 mm increments)These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by .
Vacuum Tool for 1 1/4" HoseSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.