Thingiverse
Creality Ender 3 - Silence & Quality Mod
- Creator (as listed at the source)
- petrzmax
- Licence
- Creative Commons - Attribution - Non-Commercial - Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL STP
- Pricing
- Free
- Published
- Category
- 3D Printing
- Likes
- 2,240
Overview
Photos legend: - Green - stock cooling and drivers. - Grey - new cooling and TMC2208. For this mod You will need: - Motherboard MKS Gen L V1.0: - TMC2208 (It's set of 5 drivers. Ender 3 requires only 4): - or TMC2208 singly, not in set: - 11.2019 - Today You should choose TMC2209: - USB extension cord: - Micro SD card reader: - 5015 24V fan: Of course You will need to print parts in this Thing ;) Also I recommend You to print Petsfang Duct: - It's much better than the stock cooling and will greatly improve Your print quality. Check my I3 Mega ULTIMATE upgrade guide! There is a lot of knowledge which may help You get the best 3D printing results. You will find it here: If You don't know how to calibrate Your Flowrate check this guide: If You want to make Your printer super silent You will need to swap original fans. You can use for example these: - If the specification is right, they should be silent. There is no 24V silent fans from famous brands like Noctua but as the motherboard fan and prinhead fan should be powered directly from the psu You can connect two 12V fans in series and it should work just fine. You can find marlin for this setup in the download section. If You want to use Linear Advance with TMC2208 You need to set MINIMUM_STEPPER_PULSE for 1 in Configuration_adv.h. LCD plug needs to be connected upside down. Yeah, that's weird but trust me. There may be a need to cut latch off. Card reader needs to be glued to new box. I have used epoxy glue and it's holding well. Sd card reader needs to be connected via AUX-3 pins. Pin CS should be connected to pin 53, the rest is obvious. If it's not I do not recommend this mod to You. Make better cooling duct and You will be happy with the results. You can check out video about this mod here: It's in Polish language, but there are English subtitles! (Thanks to Ipepe for making them!)
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Ender 3 PSU Cover - 80 mm Silent FanEnder 3 Silent PSU - This is a 80mm fan holder replacement for the Ender 3 PSU 60mm. - With this project you can (optionaly) reduce the PSU noise a lot.
Snap-on LCD Cover for Creality Ender-3/Ender-3s/Ender-3 Pro/Ender-5A simple Ender series LCD Cover. No supports/glue needed. Printing orientation is as shown in the picture.
Dual Z Axis Ender 3 / 3Pro
Voron Afterburner Direct Drive Mount for CR-10/Ender 3/etc.This is a modified mount for the Voron Afterburner to mount it to a CR-10/Ender style printer using a single 400mm MGN12H linear rail. It is modified from the new Voron Switchwire printer that just came out.
Uncle Bens Ender 3 & Ender 3 Pro Fang for 40mm Fans with BLTouch and Neopixel supportIntroduction: Remix of jckz82's fang and StevenMLawson's BLTouch mount plus an optional LED strip mount. The fang is kept in place by the two screws which go through the hotend. The pictures show the orientation to print in.
Ender 3 V2 PSU Power supply slim coverPrint Settings Print as oriented in the file. Use support suport touching building plate, the holes does not require supports. Use a brim to provide more adhesion to the building plate. Infill 100%.
Creality Ender 3 V3 Thermometer Hygrometer HolderBoost Me Please Boost me as it supports me and gives me a better chance at giving a new and better product for you to print.
Creality Ender 3 board fan guardI felt uncomfortable with the Ender 3 fan being open to bits of filament etc. dropping into the board enclosure, as it's open and draws air in whilst running. Plus the fan draws air in directly under the heated bed.
Ender 3 Cable Chain, no screws, no unplug cableThis cable chain is a special design for the Ender 3 or Ender 3 pro. All parts fit perfectly and there are no additional parts needed. the special thing is that you don't have to unplug the cable to assembly it.
Ender-3 Z-motor spacer / supportSliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.