Printables
Qidi Q2 Q2C spool holder and box hub bracket (lower junction box)
- Creator (as listed at the source)
- endeavour
- Licence
- Creative Commons — Attribution — Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- Other Printer Parts & Upgrades
- Likes
- 12
- Downloads
- 70
Overview
Allows more space between the junction box and the ingress to the printer
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Qidi Q2 Q2C spool holder and box hub bracketPrint with 3-4 perimeters for strength and use the orientation it imports in as no supports are needed. I’d recommend PETG, PCTG, or ABS since they are more flexible than PLA or ASA and more forgiving of tight tolerances.
Multi-Function Desiccant Bin for Qidi BoxMulti-Function Desiccant Bin for Qidi Box. Compatible with regular 1kg filament spools, fits Ø200mm and 52~70mm wide spools. Capable for up to 1kg desiccant . Yes, it's big.
Qidi Box Riser for Qidi Q2A Qidi Box Riser for the Q2 designed to fit over the OEM riser. Glass can slide back and forth, the riser will prevent the glass cover from going back too much (beyond the lip in the glass) regardless of the retaining...
Qidi Box riser for Q2First off, I wanted to upload this as a paid print, only because it took me a lot of time and filament in prototyping, but minimum price was 5$, so here we are - it's free. This riser is meant for Qidi Q2 with the original riser.
Desiccant Spool Tumbler Remix with modifiersA remix of a remix of the Desiccant Spool holder, this 3mf file uses modifiers and process settings to close off the ends of the models while still allowing for full control over the mesh settings for the parts you do want open.
Qidi Q2 — Cooling Duct (v5.1 & v6.0 Dual-Flow)CFD-optimized cooling duct for superior overhangs and bridging on the Qidi Q2.
Qidi Q2 Toolhead Cover - Full body setsFixed and reuploaded ALL the models with clearance for the new filament sensor for the QIDI BOX. Also increased clearance of the part right below the filament cutter, to allow easier removal.
QIDI Q2 Poop Chute/BucketThis is a clip-on poop chute/bucket for the QIDI Q2 , designed to collect purge material neatly without any screws or permanent modifications.
Chamber Heat Insulation for Qidi Q2One of the main functions of Qidi Q2 is the chamber heating. However practically the heating efficiency is fairly low due to its thin plastic panels.
Extruder Coling 4010 Fan for Qidi Q2 (cheap "Polar Cooler")The following model superseded this one Unfortunately, the extruder motor cooling is insufficient: the motor heats the plate, the plate heats the extruder gears ... the gears melt PLA during a long print.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.