Thingiverse
Double Eagle M56 Hop Up chamber
- Creator (as listed at the source)
- COsasquepasan11
- Licence
- Creative Commons - Attribution - Share AlikeStated at the source marketplace; SliSearch does not verify licences.
- File types
- STL
- Pricing
- Free
- Published
- Category
- 3D Printing
Overview
This consist of spare parts designed for Double Eagle M56 spring shotguns. They replace any piece from its hop up chamber. The BB follower, as I called it, has been modified for a 3mm spring to be attached instead of the original one with a smaller diametre since the last can be pretty difficult to obtain. There is no instructions yet in how to install those parts. If you know how to disassemble the shotgun, which is not only tedious, but also easy to lose parts, you should have no problem in replacing the hop up chamber. Parts have not been tested, so any kind of feedback will be very appreciated.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Double Eagle M56 Hop Up chamber spare partsThis consist of spare parts designed for Double Eagle M56 spring shotguns. They replace any piece from its hop up chamber.
M870/M8876 M4 Mag AdapterMine was too loose and I didn't like the release being on the side because I would randomly eject my mag on accident.
M870/M8876 GripI slightly remixed this because when I pumped mine it would not pull back far enough to load more BBs. So this is like 2mm shorter.
M870/M8876 Barrel SpacerI was modding my M8876 and broke this part. So here is a 3D printable one.
M870/M8876 Mag Tube CapDesigned for modifications, meant to be printed in TPU for a press fit.
M870/M8876 Internal Tracer UnitThis replaces the two pieces that hold the 3 barrels on the inside of the outer barrel. The holes should snugg-ly fit 3mm flat top UV LEDs.
M870/M8876 InternalsHere are close-to-original models of the parts that hold the barrels together. I have dubbed them the barrel holder, the barrel holder holder, and the buckings.
WEB DOMINATOR ver 1.5 stronger model (Rucksack strap adjustment tool)overview The Web Dominator is a handy gadget that helps you organize and secure the excess webbing straps or cords on your backpack, vest, or other gear.
Airsoft M4 Hop-up UnitM4 Hop-up Unit for an Airsoft Gun. Should work with any TM Compatible Airsoft Gun. Been looking for an 3D Printable Hop-up and None where available, So i ported an Model Created By an user on GrabCad user to STL files.
MONSTERENERGY Suppressor! (airsoft)This makes Monsterenergy a suppressor for airsoft! You need a cutter, compass-cutter, pliers and hand drill to make holes in the empty can. If you want to put the sponge inside the Monsterenergy-suppressor, remove the inner barrel.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.