Creality Cloud
bed level
- Creator (as listed at the source)
- Glockgangsta19
- Licence
- CC0Stated at the source marketplace; SliSearch does not verify licences.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Category
- 3D Printer Parts
- Likes
- 50
- Downloads
- 946
Overview
The creator did not write a description for this model.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Anet A6/A8 Bed Level Thumbwheel UpgradeIMPORTANT: Get the latest updates for this model here on PrusaPrinters. In 2021, all updates and uploads of new models were moved to PrusaPrinters, of course still free and under the same conditions...
Bed Leveling Calibration Test Object (Parametric)Parametric version of bsutton's excellent bed level test object. Includes a greater number of test points spread evenly across the bed. This object is designed to help you check that you are correctly leveling you printer bed.
Bed Leveling Tool
Bed Level & Filament Speed TestThis is my own bed level test and filament print speed test that`s quick and easy, it is only 1 layer high. Print takes between 12 and 25 minuets to print depending on your filament selection.
Bed Leveling Calibration test objectThis object is designed to help you check that you are correctly leveling you printer bed. It prints three nested squares. Try to adjust your printer as the object prints (watch out for your fingers :) .
CR-10 Bed Level TestBed level test. I've created this for my CR-10 500x500 to test and level the bed. it's a massive bed and I found this very helpful to level and test if the whole plate is perfectly aligned so here it is for all of you guys.
Anet A8 bed level calibration testThis is the test I came up with for my Anet A8 bed level. It goes all around the bed 2 times and prints 2 10x10x5mm cubes in the center. It prints 2 lines right next to each other.
Ender 3 (235x235) Leveling TestNew PARAMETRIC version is here: You can customize the bed size there, number of points and more --- This model is made only for 235x235 bed (like Ender 3) For other sizes check the link above It is for testing if your bed is properly...
Numbered Bed Level CheckerYou can stop the print after the first layer. The number help identify each block and orientation after taking it off the bed.
RepRap Prusa i3 bed auto-levelWhen going down, the extruder will touch the bed, and the axis will keep on that heigt, since the Z_EndStopMount pieces are not glued to the axis, they will continue going down and the circuit will get opened, then, z-min is triggered.
Bed Level FingerKnob
The very First PrintSingle layer whole print bed, see how good or bad it comes out, no change to hide anything. tools, 3D printing added Elegoo Centauri Carbon2 (fullsize 256x256x0.2) added Elegoo Centauri Carbon2 (fullsize...
On the fly bed level testDid you spend $20 on overpriced bed glass yet still find little quirks in the first layer of your print? Got your bed corners dead perfect and still got an issue from print to print? Try this test to see if there is variance in the glass.
Fast Live Levelling Calibration 220mmThis is a very fast way to manually live level your bed very accurate. Takes about 3 minutes to print, is 220mm square. As it prints adjust your bed until the fills are smooth and even.
MK8 i3 - 50mm Radial Circular Fan ShroudI've designed a fan shroud for a 50mm radial fan for the metal carrier of the GEEETech i3 model printers. There are 3 models included, 1; The standard model for the metal carrier with MK8 extruder and hot-end.
Bed Leveling Thumb Screw
Anycubic Kossel Delta Plus Bed Level AdjustersAfter a lot of work on all sorts of things getting my bed level, I finally went down the easy road and designed these bed level adjusters.
Anycubic Mega Pro Heizbett Einstell-Rad / Bed Leveling KnobErsatz für die Standard-Einstellraeder des Mega Pro. Die Skala erlaubt das einfache Einstellen bei der Verwendung unterschiedlich dicker Druckplatten auf einem magnetischen Heizbett (Steigung vom M3-Gewinde ist 0.5, d.h.
Anet A8 $4 Bed LevelingDO NOT LEAVE THE GAUGE ON YOUR PRINTER WHILE PRINTING! YOU WILL DAMAGE YOUR PRINTER. New November 2021: I have uploaded a new version of this gauge mount. See image #6.
Bed Level Calibration ObjetcsWith this things you can easily level your printing bed. First level it with the paper method and then print one of this calibration objects.
Indexable Bed Leveling Knobs for Rep 2xThese leveling knobs help keep your bed level while making adjustments to your bed height. Each knob has a moveable scale that allows you to set a "zero" bed height. Plus, minus signs indicate an increase or decrease in bed height.
5 Minute Z Calibration Surface / First Layer CalibrationYet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
Flashforge AD5X bed level screw toolA pop-on thumbscrew tool for the AD5X's bed level screws.
Infinity Bed Flatness TestI made this to see if my printer bed was flat. This is 0.2mm thick with 0.4mm wide lines. This thickness was the lowest I wanted to test for my Da Vinci 1.0.
Creality Ender 3 V3 SE/KE Bed Leveling Shims for height compensationsThe extended handle version can be used not only for the rear left bed level point but as a regular shim as it is more convenient to install
Prusa I3 MK2 Bed Level Test PrintThis is to test the bed levelling on the Prusa I3 MK2, I recently discovered that the probe doesn't in fact adjust for "unflat" beds even though it's meant to and this print will help check for inconsistencies.
Ender 5 Plus Bed Level GcodeSimple Gcode for setting paper gap on 4 corners plus center of Ender 5 Plus HEAT BED AND NOZZLE TO PRINT TEMP BEFORE USING THIS TO SET PAPER GAP Print the squares to test your gap if you want.
More Easy Bed Level - Anycubic PhotonThe original design has two problem: Hardware parts are not so common (no M4 inserts, and no M6x30 required and you must use a tool to secure screws (tight space to operate)...
Ender 3 Bed Leveling Lock/DiscretizerThis is the top 100% recommended for everyone to use on their 3D printer it only takes a couple minutes to have it perfectly and completely locked in very nicely and it is a very handy 3D printer part.
Z-probe holder for Makerfarm i3 with auto bed-levelHere is a holder to mount your Z-endstop on a servo. Works with a 9g servo, but is easily customizable to whatever you're using.
1 Minute Bed Level Tests (150mm & 200mm beds)Both tests take less than 1 minute! There are 9 dots total and each dot indicates how level an area of the bed is. Dots that peel off, don't print, or fill in too thin indicate the bed is too low in that region.
3mm/5mm Z-Axis Shim for Flashforge Creator Pro Glass BedThis is a remix of Stigern's 0.25" Z-axis shim for the FF Creator Pro. I'd gotten a 5mm glass bed from my local supplier, so I remixed it to come up with a 5mm version of my own.
Ender 3 V3 KE Bed Spacers for LevelingThese spacers are to help get the bed of the Ender 3 V3 KE (and SE) as flat as possible. These also have the spacer height on the OD to make it easier to identify if you print more than one or two.
Level rotary direction ReminderWer kennt das auch?! Wenn gelevelt werden und an den Schrauben gedreht werden muss, steht man wieder wie blöd da und überlegt in welche Richtig man nochmal drehen soll!
Bed level adjuster for Da Vinci printers (possibly other makes)Made these to make it easier to adjust the bed height on my Da Vinci printer as I was finding the stock thumb screws a bit awkward.
M3 double nut thumbwheelFor use with M3 double nuts used as fasteners. I use it for the spring-loaded bed-leveling double-nuts on my prusa mendel 3d printer You can tighten/loosen one or two nuts at a time.
Elegoo Neptune 3 Plus Bed Level TestThe elegoo neptune 3 plus is difficult to level sometimes. This test hopefully will help you figure out what needs to go up and what needs to go down.
Ender 3 V3 KE Bed Mesh Level Test (220x220mm - 5x5 Mesh)A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed.
Ender 3 bed-level
Skew Test & Bed Level Test - for 220x220 (or bigger) bed sizeIn my H-bot printer i experienced some issue like : round circles printed like oval, straight lines not perpendicular each other, and in general axes not perpendiculars .SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.