Thingiverse
Kranvagn - Swedish Heavy tank
- Creator (as listed at the source)
- hariusstl
- Licence
- Personal use onlyThe marketplace states no licence. SliSearch shows the most restrictive assumption; check the source page before you use the model.
- File types
- The marketplace does not list the file types.
- Pricing
- Free
- Published
- Category
- Vehicles
- Likes
- 21
Overview
The project to create a new vehicle for the Swedish armed forces was launched in 1949. For reasons of secrecy, the tank received the unusual name KRV, which stood for “self‑propelled crane.” The project was based on French developments related to the AMX 50. Lightweight chassis were produced and tested, and a mock‑up of the vehicle with a turret was built. A prototype was not built. I printed 80% (hull 80.1%). For Tracks - recommend 80.1/80.2% The hull is universal for Strv K and Kranvagn.
Print this with Prinnu
- Download the model file from the source page. SliSearch moves no files.
- Upload the file at slicience.com/quote. Prinnu quotes it in minutes.
Similar models
Chosen by shared tags first, then category. Each one links to its own marketplace.
Booster Pack for the Space Shuttle EndeavourThis is an addon to my Space Shuttle
Tiger 1 Kit Card1:64 print-in-place kit card. Assembly required Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy.
Just a Tank
FPV-Rover V2.0 (Tank)It's finally here. Version 2.0 of the FPV-Rover. This is the second version of the FPV-Rover. This one is with 540 motor.
Churchill IV tank kit cardEasy to assemble – insert the turret bushing into the hull, attach the gun to the turret, and secure the back of the turret using a dovetail joint.
The Tiger Tank (Panzerkampfwagen VI)
Panzerkampfwagen VI Tiger tank 1/72Chceck also other models . Easy to assemble. -organic support -0.15 layer height
Tank KV-1 RC model 1:10RC model tanku KV-1 v měřítku 1:10. Předloha je typ vyráběný v červnu 1941. Model má ovládaný pohon, otáčení věže, náměr a zákluz. Veškeré podklady pro stavbu jsou v návodu.
Easy Print 1:100 Leopard 2A6This is a remix of Blue Tape (optional) Printing Instructions: Use 0.1mm layer height for best results Use the .3mf file with custom supports or use build plate supports Assembly Instructions: Remove all...
Barrel 200 liter 1/10 scaleEasy and fast to print in one piece. If you want to put stuff inside you can also print it in two pieces. The details make it nice to look at.SliSearch is an index: it stores public metadata only, does not host files, does not verify licences, and has no partnership or affiliation with the indexed marketplaces.